fbpx

No products in the cart.

Home Forums General Discussion Buy and Sell FS: Eibach .47 DR650 Fork Springs – Tauranga

Viewing 1 post (of 1 total)
  • Author
    Posts
  • #35653

    Eddieb
    Keymaster
    • Location:
    • Bike: Suzuki DR650 ADV
    • Rank: 1200cc Rider

    .47 spring rate fork springs for the DR650, these would also fit a DRZ 250. Procycle says these are 24% stronger than the stock springs which I think are .39 spring rate.

    These were fitted to my DR650 for about 20,000km’s but I’ve now gone heavier as I got heavier and fitted a 30 litre Safari tank.
    Stiffer springs are shorter than stock ones so you have to add spacers to make up to the original spring length/preferred preload amount. I’ve included a few lengths of plastic tube for setting preload but you may need to source and supply your own as how much preload is required is rider weight/riding style/bike setup specific. The preload tube that came with the springs originally was just clear plastic stuff so anything of a decent thickness from Mitre10 will do.

    $100 pickup from Welcome Bay, Tauranga.

    First to reply on this thread below that they want them gets them.

Viewing 1 post (of 1 total)
  • You must be logged in to reply to this topic.