Home › Forums › General Discussion › Gear › Introducing the Bata Motor Sandal!
- This topic has 20 replies, 3 voices, and was last updated 4 years, 3 months ago by
Joost Stenfert Kroese.
-
AuthorPosts
-
November 11, 2016 at 3:02 pm #15614November 11, 2016 at 3:36 pm #15616
Mark SpashGuest- Location:
- Bike:
Is it April 1st again? This has to be a joke?
November 11, 2016 at 3:36 pm #15617
David BallGuest- Location:
- Bike:
Just the thing to nip to Starbucks in.
November 11, 2016 at 5:31 pm #15627Exhaust heat resistant AND fluorescent night vision. Well that checks all the right boxes for me. 😉
November 11, 2016 at 5:36 pm #15630
Sean GrayGuest- Location:
- Bike:
Does it have Kevla stitching?
November 11, 2016 at 6:36 pm #15632
Gary ReesGuest- Location:
- Bike:
This sort of stupidity got Trump elected.
November 11, 2016 at 6:36 pm #15633
Kris LockyerGuest- Location:
- Bike:
That’ll really stop your foot from getting degloved.
November 11, 2016 at 8:14 pm #15640Apparently this is no joke…
November 11, 2016 at 8:14 pm #15641Apparently this is no joke…
November 11, 2016 at 9:36 pm #15642
Jimi SmithGuest- Location:
- Bike:
November 11, 2016 at 9:36 pm #15643
Jimi SmithGuest- Location:
- Bike:
Bata WTF this is DUMB!!!! if you wear these you are a fucken idiot!!!
November 11, 2016 at 10:36 pm #15648
Hàdge HaineGuest- Location:
- Bike:
What’s the water proofing like?
November 11, 2016 at 10:36 pm #15649
Stephen MillarGuest- Location:
- Bike:
Is this a wind up?
November 11, 2016 at 11:47 pm #15652Hàdge Haine, the water proofing would be easy enough to achieve. Put your foot in a plastic bag, something like the bag a loaf of bread comes in, and secure above the ankle with an elastic band or two. This simple solution still allows for gear shaft protection and double use of back strap.
November 12, 2016 at 11:37 am #15655
Johan OlivierGuest- Location:
- Bike:
In some places they are seen as an upgrade 😉
-
AuthorPosts
- You must be logged in to reply to this topic.