February 7, 2016 at 1:08 pm #11538
First time posting here, 3 weeks fresh with a DR650.
Anyway, I’m looking at buying a few things off the ProCycle website and I was wondering if anyone else would like to get in on that order and we can split postage?
I’m in Hamilton and it would get delivered to my workplace in Te Rapa. I would prefer local people who can collect as I don’t want to worry about forwarding on postage (I may hand deliver if you’re somewhere that’s a nice ride from Hamilton).February 7, 2016 at 5:35 pm #11539
I’m probably in. I know there’s one thing I’ll get. I’ll have to look at the site and see if there’s anything else.February 7, 2016 at 6:21 pm #11541
I’ll probably be putting the order in sometime between the 10th – 17th of this month, gives me a bit of time to do my research.February 8, 2016 at 5:24 pm #11544
Rank: 1200cc Rider
- Location: Whakatane, Bay of Plenty
- Bike: CT110, Husky TE 250, DRZ250, CB500X
I am after warp 9 4 finger levers, .52 front springs n cogent DDCs. I live in whakatane so decent ride for me to collect. Are you trying to keep under GST limit?
No panic if I miss out because postage gets silly. Contact procycle for cheaper shipping options.
Is is cheaper postage wise n whatnot from these guys?
http://adventurebikeaustralia.com.au/product-category/suzuki-dr650/February 8, 2016 at 5:34 pm #11547
Rank: 250cc Rider
Be careful buying and sending anything to a business address. Why? Regardless of the GST thing, I got stung just because it was a business address, doesn’t matter with the e-mail explanation…I said because of security of an empty house etc, they didn’t want to know. It was a business, so pay the extra fees…February 8, 2016 at 7:01 pm #11548
*sigh* it’s never simple is it.. Thanks for the heads upFebruary 10, 2016 at 9:23 pm #11552
I’d like a pair of Mirror extenders and a clutch holding tool.
I’ve been experimenting with where wind noise is coming from for a quieter ride and for me there a lot of air coming off the inside of the mirrors straight into the front quarter of my helmet on each side.February 10, 2016 at 10:49 pm #11554
Ok, after looking at the other site (thanks brainflex), that site has some good prices for some things.. not so for others. I’ll probably still put an order through Procycle, if it comes in at more than $1000 then I’ll go and get a supplier code. but we’ll have to accept the %15 GST.February 10, 2016 at 11:04 pm #11555
@Edward Is that the EBC lazer cut one($16.95) or the clamping($25.95) one?
Im just adding everything to a spreadsheet now to get an initial ideaFebruary 11, 2016 at 7:25 am #11556
The ebc Lazer cut one.February 14, 2016 at 11:54 am #11597
Rank: 50cc Rider
- Location: ~ 37.2 deg South
- Bike: A couple of Suzukis
For the DR650 I’d go for: a Magnetic Drain Plug (cannot find M14 x 1.25 pitch in NZ!) and a No Toil Air Filter. Cheers.February 15, 2016 at 9:43 am #11600
Cheers chasio, i’ll add to the list.
I picked up a new handlebar over the weekend, and I’m focused on sorting my full license this week. But I’ll aim to have the order confirmed with everyone by the end of the week.February 23, 2016 at 1:35 pm #11648
Hows the order going?July 7, 2016 at 7:39 pm #13297
Sorry to bail on everyone here.
The bike took a slide on the road, work got busy and I got scared away by the regulations around importing stuff.
I wish I could say I’m back and willing to make an order, however there’s a new forum post on the way in which I will explain my new predicament..
You must be logged in to reply to this topic.