02FAA exhaust from a TL1000
Length: mating surface to end of pipe body 525mm
Oval height: 129mm
Oval Width: 112mm
32mm outlet
Must be collected from Hamilton.
Was fitted to my DR, and my DR before that but I’ve recently replaced it with the larger flowing GSXR600 pipe.
Orignal TL hanger bracket has been ground off.
Has a rattle where I took the end cap off and ground a hole through the end plate to see if it sounded/performed better. It didn’t so I screwed a bolt into the hole but it sounds like it’s come loose. Just needs tightening/filled with liquid metal.
No mid pipe.
Fitted to my first bike:
side on, plus this shows the short front guard I have for sale on the buy and sell forum.
